Products » Specialty Rigging » Wall Edge Roller

Wall Edge Roller

Two great solutions to assist in lowering or raising wire rope, electric cable (with plugs) and safety line while preventing damage on the exterior of the building or to wire rope/cables.

Part No. 920192 can be placed on the edge of a wall while part no. 920153 mounts on any Outrigger Beam and Parapet Clamp with a beam height of 3, 4, 5 or 6 inches and beam width up to 5 inches. Use another edge roller at the rear of the beam for power assisted material lifting.

> Spec Sheet: Wall Edge Roller 

Wall Edge Roller
Part Number: 920192

Join Our Newsletter

Bee Access Products
2145 Indian Road
West Palm Beach, FL 33409

Toll Free   888.616.9003
Phone   561.616.9003
Fax   561.616.9005

© 2021 Bee Access Products - All Rights Reserved. Privacy Policy
Website Design by IWD Marketing