Products » Safety Products » HOLD-ME Lifeline Anchor

HOLD-ME Lifeline Anchor

QUOTES:
"Knots shall not be used for load bearing end terminations"
- ANSI Z-359.1 Section 3.2.7.2.2

"Knots can reduce the breaking strength of lifelines up to 50% depending on what type of knot is employed."
- National Cordage Institute

The HOLD-ME knotless lifeline anchor device is the practical solution to comply with the current ANSI Z-359.1 national standard.

INSTRUCTIONS:
See Spec Sheets below.

> How to rig a HOLD-ME anchor device

> HOLD-ME anchor device rigging applications

> HOLD-ME Spec Sheet

HOLD-ME Lifeline Anchor
Part Number: HMA58

Join Our Newsletter

Bee Access Products
2145 Indian Road
West Palm Beach, FL 33409

Toll Free   888.616.9003
Phone   561.616.9003
Fax   561.616.9005

© 2021 Bee Access Products - All Rights Reserved. Privacy Policy
Website Design by IWD Marketing